Biomass pyrolysis plant employs continuous carbonization furnace to process various biomass waste into charcoal. The raw materials include sawdust, bamboo, wood, coconut shells, etc. Due to the wide application and continuous design, Beston biomass pyrolysis equipment has been successfully installed in many countries, such as Turkey, Russia, Spain, Ghana, etc. If you are looking for a quality biomass machine manufacturer, contact Beston now!
Currently, Beston Group has developed various models of biomass pyrolysis equipment for sale. Firstly, it can process 500 to 3000 kg of raw materials each hour. Secondly, it is capable of processing all kinds of biomass waste, such as sawdust to charcoal, etc. Thirdly, Beston uses quality materials and unique design to prolong its service life. Below are the layout design and more parameters for your reference.
| Model | BST-J12 | BST-J18 | BST-J40 | BST-05 Pro (skid-mounted) | BST-10 | BST-30 | BST-50 |
| Input Capacity | 12m³/batch | 18m³/batch | 40m³/batch | 0.3-0.5m³/h | 2-4m³/h | 7-9m³/h | 10-15m³/h |
| Reactor Size | φ1900mm*L4500mm | φ1900mm*L6600mm | φ2800mm*L7100mm | φ830mm*L5500mm | φ1300mm*L14051mm | φ1700mm*L14180mm | φ2000mm*L14260mm |
| Land for Equipment (L*W*H, Standard Configuration) | 9m*6m*6m | 12m*6m*7m | 15m*18m*7m | 10m*8m*3.9m | 29m*15m*5m | 30m*15m*8m | 35m*18m*9m |
| Weight (Standard Configuration) | 18T | 22T | 34T | 15T | 35T | 35T | 49T |
| Energy Consumption (Standard Configuration) | 11kw/h | 13.5kw/h | 25kw/h | 31kw/h | 34.7kw/h | 61.5kw/h | 116kw/h |
| Working Method | Batch | Fully continuous | |||||
| Feeding Requirement | / | Size: ≤20mm; moisture: ≤15%; strong liquidity | |||||
| Structure | Horizontal rotation | Double barrel single hearth | Double barrel double hearth | ||||
| Speed | 0-2RPM | 1-9RPM | |||||
| Control Method | Control by buttons | PLC control | |||||
| Reactor Material | Q245R | Q245+310S | |||||
| Pressure | Micro negative pressure | ||||||
| Heating Material | Diesel, natural gas, heavy oil, biomas, etc. | ||||||
| Heating Method | Direct heating | ||||||
| Noise (dB) | ≤80 | ||||||
| Condenser | Circulating water cooling | ||||||
| Rotation Method | External gear rotation | ||||||
Through the pyrolysis of biomass, we can get charcoal, tar, wood vinegar, and combustible gas.
Biomass charcoal is more eco-friendly than traditional charcoal. In addition, it is of higher calorific value. So it is a great alternative fuel, which can be used in cooking, barbecue, and industrial factory. Besides, some charcoal, for example, bamboo charcoal, coconut shell charcoal, etc. is of great adsorption, which can be used as deodorant, purifying agent, desiccant, etc. Also, it is a great raw material of activated carbon. That is to say, you can sell charcoal well at a good price.
There are over 300 kinds of chemical elements in tar, which makes it an important chemical material. Besides, people widely use tar as waterproof materials for its high corrosion resistance and wear resistance. More than that, tar is also employed to produce oil paint or as assistant materials for producing ships.
It can be found in food preservative, medicinal sterilization, and anti-inflammatory or the treatment of skin disease.
Our biomass pyrolysis plant is designed to recycle combustible gas as heating fuel to lower your cost.
Our charcoal production line uses continuous carbonization furnace, which makes the whole process easy, safe and effective. Let’s have a review.
In order to improve the charcoal quality and yield, we have some requirements for the raw materials. For example, the water content should be less than 15%. Also, it is better smaller than 20 mm. So we will equip the auxiliary equipment according to your raw materials, such as dryer, crusher, etc.
The prepared raw materials will be conveyed to the carbonization furnace. The furnace is automatic working so that it is easy and safe to operate. Moreover, our biomass pyrolysis plant uses a “one-fire-two-steps” design. So the raw materials are dried within 150 ℃. When the temperature reaches up to 300 ℃, charcoal will be generated. In general, the carbonization temperature is between 300 to 600 degrees. This design will make full use of the heat and also improve the carbonization speed.
Generally, you can get charcoal 15 to 20 minutes later after feeding. In order to keep workers from high temperature, we use a water cooling system to quickly cool down the charcoal to 30℃ or less. Besides, the charcoal should be saved under an oxygen-free condition to avoid spontaneous combustion.
Firstly, this system is able to remove the sulfur of combustible gas. Meanwhile, there is a condensing system to extract tar and wood vinegar out. Thirdly, we also have a multiple dedusting system to purify the leftover gas. More than that, you can choose the equipment according to your local policy. So there is no need to worry about the exhaust emission.
To conclude, through the biomass production process, you can find Beston biomass pyrolysis equipment is safe and easy to operate. In addition, it is continuous. That is to say, you can discharge charcoal while feeding, which will greatly improve the capacity and save your time. In particular, Beston has its own factory and professional R&D team. So we can offer you customized business plans at a fair price. Also, we have 8 overseas offices and more than 60 after-sales engineers to serve you. So you will have no worry from pre-sales consulting to installation, product updates, etc. Welcome to contact us for more details!